More Mug.
More Power.
More for Less.

XMUG 777 HOT is an actively temperature-controlled mug for larger drinks, slow sipping and interrupted days. It combines a 777 ml recommended fill, active reheating, a substantial battery, precise controls on the mug, numerical feedback and direct USB-C PD charging. Your drink and your preferred warmth can move through the day together.

The difference is the combination: bring a cooler drink back toward your chosen temperature, prepare a larger pour, drink away from a powered desk, adjust degree by degree on the mug and recharge through USB-C PD. Individual features exist elsewhere; XMUG brings these capabilities together around a long, interrupted drinking session.

Think of someone who slowly enjoys a larger coffee or tea, gets pulled into calls or family life, or changes places during the day. XMUG is especially relevant when warmth, fewer refills and direct control matter more than minimum weight. Quick small drinks and very lightweight carry may call for a different mug.

Keep your chosen setting and return when you can. XMUG can actively restore a drink that has fallen below it, rather than only slowing the cooling. Ordinary idle time does not itself end the session; available battery and protective cutoffs still apply. The benefit is a drink that fits around life.

A larger fill can reduce trips to refill, active temperature control reduces the need to watch the cooling clock, and the controls stay on the mug. For writing, studying, reading or a long conversation, that means fewer drink-related interruptions. It is a convenience for your routine, not a claim that a mug improves cognitive performance.

A vacuum cup slows heat loss without a battery. XMUG retains an insulated architecture and adds energy to maintain a selected temperature or restore a cooler drink. Choose that extra control if it matters to you; it also brings charging, care and more weight. A simple insulated cup remains a useful choice for people who do not need active heat.

Yes. Active reheating is a core XMUG function: when a drink is below the selected temperature, the heater can add energy to bring it back toward that setting. This goes beyond passive insulation. Actual warming time depends on fill, starting temperature, target, surroundings and available battery.

The early prototype experience was approximately 20–30 minutes for 500 ml going from about 25°C to 55°C (77°F to 131°F). That is a specific development observation, not a 777 ml test or a universal production promise. A different drink volume or starting temperature changes the task.

You can begin with an already hot drink. Select a comfortable drinking temperature and let a hotter drink cool toward it; XMUG maintains the setting with active heat as needed. The mug does not actively chill a drink that starts above the target. Leave room for the lid within the recommended fill.

XMUG 777 HOT is designed for a selected drinking temperature between 35°C and 65°C (95°F to 149°F), not boiling or cooking. The high-power heating design supports reheating below the chosen setting. It does not turn the mug into a boiling-water appliance.

Yes. You do not have to accept one fixed hot setting. Choose a quick preset or adjust the target in 1°C or 1°F steps directly on the mug. A gentler temperature or a warmer sip can be a personal choice; the same setting will not taste ideal to everyone.

Adding a cooler ingredient can lower the drink temperature. If the combined drink falls below your chosen setting, XMUG can actively warm it toward that target. The 777 ml recommended fill gives a 16–18 oz coffee room for milk while keeping the total within the fill limit. That does not establish a separate timed milk-drink test.

XMUG 777 HOT focuses on warming and temperature maintenance. If a drink is hotter than the target, it cools naturally; the current product does not actively chill a drink.

777 ml, approximately 26.3 US fl oz, is the recommended fill with the lid. It is the practical drinking amount used in the current product story, rather than a brim-full figure. Leave the intended lid clearance and follow the final fill markings and instructions.

The recommended 26.3 US fl oz fill accommodates a 16–18 oz coffee with room for milk, provided the total stays within 777 ml. This is useful when your usual order feels cramped in a smaller mug. The extra room is about a comfortable larger drink, not a reason to fill above the limit.

You can prepare more of the drink you already enjoy before sitting down. Combined with temperature control, that can mean fewer refills during a work session, book, meeting or conversation. You still choose how much to pour; 777 ml is capacity, not an instruction to drink a particular amount.

No. The 777 ml figure is a recommended upper fill, not a requirement to fill the cup every time. Earlier prototype observations used 500 ml. A smaller fill has different heating and runtime conditions, so do not apply the 777 ml record to it as a guarantee; follow the final operating fill guidance.

Coffee, tea and water are natural everyday use cases for a temperature-controlled drinking mug. The benefit is choosing a comfortable sipping setting rather than rushing before a drink cools. Follow the final beverage and care guidance for ingredients and preparation; XMUG is a drinking vessel rather than a brewing or cooking system.

Stay within the recommended fill and clean drink residue promptly, especially after milk or flavored ingredients. Heat control is for your preferred sipping temperature; it is not a food-preservation or sterilization function. Final beverage suitability and cleaning instructions will accompany the production product.

M selects quick temperature presets, Power switches the mug on or off, and C provides custom temperature adjustment. These core controls are on the mug, so changing your drink setting does not require opening a phone app. Follow the supplied production guide for the final button sequence.

The current M-mode presets are 50°C, 55°C and 60°C, equivalent to 122°F, 131°F and 140°F. They provide quick starting points for a gentler, middle or warmer drink. Custom mode lets you choose the degrees between them.

Yes. The current custom range is 35–65°C / 95–149°F, adjustable in 1°C or 1°F steps directly on the mug. For example, you can select 131°F or 132°F rather than being limited to a small set of fixed temperatures.

Yes. The current control direction supports °C and °F, including 1°C and 1°F adjustment steps. A 1°F step is about 0.556°C; it is not the same sized step as 1°C. The core temperature choice stays on the mug in either unit.

You can see actual temperature, target temperature, battery and operating status. During reheating, that separates where the drink is now from where you want it to go. Direct numerical feedback helps reduce guessing about the selected setting and what the mug is doing.

No app or Bluetooth pairing is required for the first generation’s core drinking functions. Power, presets, custom temperature and status are handled on the mug. That makes the essentials available when your phone is elsewhere and avoids adding phone setup to a simple drink.

A 1°F setting step is approximately 0.556°C. Setting resolution and the accuracy or uniformity of a whole drink are different measures. Final accuracy claims need a defined measurement method and production validation.

A lidded prototype was still operating at the 6 h 45 min observation point: 777 ml water, about 31°C starting temperature, 55°C target and about 25°C room. The time includes warm-up. Starting battery charge and final shutoff time were not stated. It is a designer-reported observation, not a guaranteed production runtime.

You can drink with the lid off, but runtime is recorded separately. The 9 September log used 777 ml, about 53–54°C starting water, a 55°C target and about 25°C room: 14:06–18:00 total, with 55°C reached at 14:22. Starting charge was unstated. These conditions differ from the later lidded test; they do not establish a matched lid-on/lid-off difference.

Fill, lid use, starting temperature, target, room temperature, battery charge and battery condition affect the heating task. Restoring a cooler drink uses energy that simply holding a warmer one does not. The published records are useful examples with conditions attached; your session can differ.

Ordinary idle time does not itself end your session in the current product direction. You can return after an interruption while energy remains available. Battery limits, protective cutoffs and switching the mug off still apply; this is not a promise of unlimited heating or the removal of safety functions.

Use a compatible USB-C PD adapter and suitable cable. The adapter must support the required PD output profile; a USB-C connector alone does not establish compatibility. The final supplied guide identifies the supported setup.

A compatible USB-C PD supply can make recharging at another location easier. Check its output profiles and cable rather than the connector alone. A supply that does not offer the required profile may charge more slowly or fail to provide the intended charging behavior. The final compatibility guidance will identify supported setups.

Yes. Use a cable suitable for the required USB-C PD output and in good condition. An adapter’s headline rating does not establish what reaches the mug through a particular cable. Follow the final product instructions and matched-kit guidance.

No. Active heating pauses during charging. The first-generation use pattern is recharge, then unplug for a cordless drinking session. Keep the mug upright during charging. This behavior is part of the current design and should not be mistaken for a heater fault.

A source that supports the required USB-C PD profile, with a suitable cable, can support mobile recharging. A USB-C socket alone is not enough. Check the output specification and supported combinations before relying on a power bank or vehicle port.

First check the power source’s PD output, the cable and the charging status shown on the mug. A shared multi-port adapter may not provide its headline output to every port at once. Keep the charging area dry. If the matched setup still behaves abnormally, stop repeated trials and contact XMUG through the inquiry route with the adapter and cable details.

No dedicated charging coaster is required. XMUG recharges through USB-C PD on the cup, so compatible power at home, work or a destination can support the same mug. Bring a suitable adapter and cable when needed, then unplug to use active heat away from that charging spot.

You can pass your fingers through the handle while your palm rests against the cup, spreading support across the hand rather than relying on fingertips alone. This is a considered grip for a larger mug; it does not remove the weight.

The sliding lid can be moved with one hand for direct sipping, and the threaded connection secures the lid to the cup. The handle supports a fingers-through grip. This gives an everyday route from holding the mug to taking a sip; actual comfort depends on your hand and the final product.

The handle allows a fingers-through, palm-supported grip that can also be useful with gloves. Glove thickness and hand size matter, so check your own fit. This describes the grip design, not a guarantee for every glove or of runtime in freezing conditions.

The considered lower profile is designed for vehicle cup holders. Check your holder’s width, depth and handle clearance. A fitting base does not prove compatibility with every vehicle or a secure fit through every road condition.

A substantial cordless reserve, a supported grip, a sliding splash-resistant lid and direct PD recharging work together across the journey. Check cup-holder fit and your charger’s PD output in advance, and keep the mug upright. Handle and drink from it when safely stopped; vehicle compatibility and travel conditions still matter.

Cordless temperature control can be useful when you sit with a drink away from a powered desk, including a campsite or fishing break. A compatible PD source is useful for later recharging. Outdoor temperature changes runtime; these are use scenarios, not extreme-weather, waterproofing or ruggedness certifications.

The threaded sliding lid helps resist drink splashes during normal upright use. That does not establish fully leakproof, prolonged inverted carry inside a bag. Keep the current mug upright and follow the final lid and transport instructions. Splash resistance of the lid also does not establish whole-mug waterproofing.

An earlier empty prototype was measured at 1085 g. Adding 777 ml of water gives an estimated total around 1862 g; that filled figure is an estimate, not a separate weighing. Final production weight and complete dimensions are unconfirmed. XMUG prioritizes capacity, insulation, active heat and energy reserve, so consider the substantial weight before choosing.

The current drink-contact material direction specifies 316L stainless steel. Final material declarations and food-contact validation must support the production product; a grade name alone is not a certification.

The 316L drink-contact material direction is a deliberate design choice. Surface performance still needs evidence across drinks, cleaning and heat cycles. This preview does not claim an indestructible surface or a validated lifetime. Final finish, cleaning rules and durability evidence will accompany the production specifications.

Hand wash the current prototype, keep electrical and charging areas dry, and do not submerge or microwave it. Clean drink residue after use and follow the final supplied care instructions. Those instructions will define how to handle the lid and any removable parts; do not assume unannounced disassembly steps.

Dishwasher suitability has not been validated. Hand wash the current mug and follow the supplied use and care instructions. Printed and engraved finishes also need appropriate finish-specific care.

No specific IP rating or certification mark is confirmed on this product preview. Market-specific documentation is confirmed for the final production product. Do not submerge the current mug.

Finish-specific care needs to be confirmed for the agreed customization. Cup engraving, UV relief and packaging decoration are different processes and should not be treated as having identical washing durability. Hand wash the current mug; ask for the final care guidance for your selected finish.

Lucky777 is a personal wish for good mornings and good things ahead. The 777 identity can become a small daily reminder of the person or moment behind a gift. It expresses meaning and affection; it does not promise luck, health or an outcome.

A partner, family member, friend, colleague or community member who enjoys a larger warm drink slowly may appreciate its everyday usefulness. Think about how the person drinks, their preferred temperature and whether they accept the size, weight and charging. A meaningful gift starts with a good fit for the recipient.

Yes, customization inquiries can start from one set. Names, a message or an occasion can be discussed through the gift brief. That is an invitation to explore feasibility, not an unconditional one-unit production offer. The final minimum quantity, finish, quote and lead time are confirmed individually.

Customization options include cup engraving and UV relief, with UV crystal-transfer decoration for packaging. A name, shared memory, mark or message can connect the mug and its presentation. Artwork, placement, color, materials, feasibility and price are reviewed for the specific project.

Yes. Small teams, organizations, creator communities and personal groups can discuss coordinated gifts or branding. The site’s gift audiences include couples, family, friends, teams and organizations. Quantity, artwork, budget, timing and recipient fit should shape the project; no blanket production capacity or delivery date is promised.

A name, a milestone, a phrase only you share or a community mark can give an everyday object a specific meaning. XMUG pairs that personal layer with a usable warm-drink routine. You can prepare a brief about who it is for, what the moment means and the style you want, then discuss the practical details.

No app is required for core power, temperature selection or status viewing. That makes the essential experience straightforward to explain when giving it as a gift. The recipient still needs to be comfortable with the weight, hand washing and matched PD charging; include the final use and care guide.

First check whether it is charging, switched off, already at or above the selected temperature, or low on battery. Heating pauses while charging, and a drink above the target does not need added heat. Check the displayed actual temperature, target and operating status. If the expected setup still behaves abnormally, contact XMUG rather than repeatedly testing a suspected fault.

Sensor location, measurement timing, liquid movement and the separate thermometer’s method can affect a comparison. The displayed actual temperature and the selected target are also different readings. Record the drink volume, target, elapsed time and measurement method when reporting a concern; final production accuracy claims need a defined test protocol.

A session can vary with the heating task, but a damaged product or unusual charging behavior needs attention. Stop using a damaged unit, keep the charging area dry and use the specified PD setup. Record the displayed status and supply details for an inquiry. Production battery instructions and validation will be confirmed for production.

Warranty duration, exclusions, battery coverage, returns and channel-specific after-sales arrangements are confirmed individually in the agreed commercial terms. This product preview does not establish a warranty contract.

For your conversation with the XMUG team, prepare the model or prototype, fill, starting and target temperatures, lid state, displayed status and the adapter and cable used. For a purchase, keep the order and product identification available. This preview does not announce a guaranteed service response time.

Production battery serviceability, replacement arrangements, cycle-life results and associated coverage have not yet been published. Lithium-ion battery performance changes with use and age; a large initial energy reserve is not a lifetime guarantee. Do not assume user replacement or unannounced disassembly. Final service and care guidance will define the supported route.

The product observations page keeps fill, lid, temperatures and the recorded endpoint beside the figures. These designer-reported prototype observations describe development; production validation and certifications are separate work.

Compare the complete use pattern: fill, active reheating, setting resolution, numeric feedback, charging method, weight and care. Ember Mug 3 and Nextmug Ultra also offer on-mug controls, so app-free operation alone is not unique. Published runtime figures use different conditions and evidence methods; they do not establish a matched performance ranking.

Creators can discuss hands-on reviews, daily-use demonstrations and collaboration through the creator page. Useful stories show a cooler drink recovering, a larger pour, an intermediate on-mug setting, PD charging or personal meaning. Show the conditions and your own experience. Samples, deliverables, affiliate terms and timing are discussed individually.

The designer reports thread compatibility with corresponding Stanley 40 oz type lids, creating a useful third-party lid direction. This does not establish compatibility with every original or aftermarket lid, or verified sealing for every combination. Check the exact lid, fit and final guidance; no brand endorsement or universal leakproof claim is implied.

This FAQ explains the current XMUG 777 HOT experience, product functions, prototype conditions, use cases, gifts and collaboration. Use the individual answer links to discuss a specific question, and retain the product’s development status and test conditions.